Flat Roof Repair in New Jersey

Yukor Construction provides residential and commercial flat roof repair services in Central New Jersey. We repair EPDM, TPO, and torch-down roofing, including damaged seams, membrane punctures, and flashing around drains and roof penetrations.

Emergency Roof Repair
Same Day Inspection
Fast Installation, Leak Fix
Residential and commercial properties

Have an active leak? Call to check availability for same-day flat roof leak repair.

Call Now: (609) 516-6573

Experience

0 Years

Free Estemate

0 %

Why Choose Us

Yukor Construction repairs flat roof leaks and uses modern materials for repairs and replacement, including EPDM and TPO — fast, high-quality work with a written warranty. Our team is among the top 3% of highly qualified roofing contractors in the U.S., certified by GAF and Owens Corning.

Free with every inspection:

Free roof measurement
Free emergency roof inspection
Free roof visualization (if needed)

Warranty

Written warranty on labor

Certified Roofers

GAF Master Elite & Owens Corning Preferred

Licensed & Insured

In New Jersey

Yukor Construction has extensive hands-on experience specifically in repairing and restoring flat roofing systems (EPDM, TPO, and other types). We know where hidden issues most often occur and fix them the right way — so your roof lasts for years

Flat Roof Repair Services for EPDM, TPO & Torch-Down Roofing

A leaking flat roof can have damage at a seam, a previous patch, or a connection around rooftop equipment. We inspect the existing roofing system and recommend repairs based on the affected areas and the roof’s condition.

Our flat roof repair services address:

Open seams and damaged membrane areas
Punctures, cuts, and deteriorated patches
Flashing around vents, pipes, and rooftop equipment
Leaks around roof drains and roof edges
Recurring leaks at previously repaired areas

Not sure which roofing material you have? Contact us for an inspection and a free estimate.

Get a Free Estimate

Residential Flat Roof Repair in New Jersey

We provide residential flat roof repair for homeowners with leaking or damaged flat and low-slope roofs. Our team inspects the membrane, seams, flashing, and drainage areas to determine what needs attention.

You do not need to identify the roofing material before contacting us. Tell us where the leak appears, when it started, and whether the roof has been repaired before. We will assess the existing system and explain the proposed work.

Looking for a local team? Check our service areas or send us your ZIP code to confirm availability. For an active leak, ask about same-day service and request a free estimate.

Has Your Flat Roof Started Leaking Again?

Tell us where the leak appears and what was repaired before. Our team will inspect the previous repair and surrounding roof details to recommend the next step. Ask about same-day flat roof leak repair and a free estimate.

Schedule a Consultation

TPO Roofing

The welded seams are airtight, and the white surface reflects the sun, which reduces cooling costs.

Ideal for properties with high energy-saving requirements.
Minimal maintenance, easy repairs.
Compatible with green technologies and LEED standards.

EPDM Roofing (Rubber)

This durable, flexible material lasts up to 30–35 years. It is effective in high humidity and with sharp temperature fluctuations.

Suitable for roofs with complex geometry.
Few seams — minimal risk of leaks.

Modified Bitumen

This remains a popular solution for properties with high-load requirements.

It can be installed in multiple layers, increasing strength and extending the roof's service life.
Suitable for warehouses and industrial buildings — it withstands heavy loads and frequent temperature changes.

We have been installing TPO roofs for over 10 years — we know which solutions are truly suited for the New Jersey climate. We serve Ewing and the surrounding areas.

Not sure which system is right for you?

Request a free consultation — we'll help you choose

CALL: (609) 516-6573

Flat Roof Installation Stages

As professional flat roof installers, we strictly adhere to technology. This ensures reliability, a watertight seal, and a service life of up to 30 years.

Here is how a standard flat roof installation in Ewing proceeds:

Site Assessment and Design
We conduct an inspection, calculate the load, design the drainage system, and select materials — be it TPO, EPDM, or bitumen — depending on the property's needs.
Substrate Preparation
We clean the surface of old coatings, level it, and repair it if necessary. Any cracks, defects, or unevenness are eliminated before work begins.
Insulation and Vapor Barrier Installation
We select materials considering the high humidity, sharp temperature changes, and seasonal loads typical of the New Jersey climate. We only use systems that have demonstrated stable performance in these conditions.
Membrane Installation
We install the roofing membrane — TPO, EPDM, or bitumen. The work is carried out by experienced flat roof installers in compliance with all regulations.
Waterproofing and Final Inspection
We conduct a final inspection — checking seams, the waterproof seal, drainage, and flashing details. Before handing over the project, we issue a technical report, attach a photo record, and confirm compliance with the project plan. We deliver a roof that is ready for use — with no hidden defects, in full compliance with codes and warranty obligations.

Why Choose Our Flat Roof Repair Company?

Local Expertise

We repair flat roofs in Central New Jersey, taking local weather conditions and the existing roofing system into account.

Clear Repair Plan

We explain which areas need attention and what the proposed work includes before starting your repair.

Free Repair Estimate

We explain the recommended repairs and provide a free estimate so you can review the scope before work begins.

EPDM, TPO & Torch-Down Repairs

We repair damaged seams, membrane areas, and flashing on existing flat roofs.

Comparison: TPO vs. EPDM

Parameter	TPO Roof	EPDM Roof / Rubber Roofing
Energy Efficiency	High. The white membrane reflects heat	Medium. The black surface accumulates heat
Seam Strength & Seal	Heat-welded for a reliable, watertight seal	Adhesive-based — reliable but requires regular inspection
Puncture Resistance	Withstands mechanical stress well	High elasticity protects against cracks
Aesthetics	Modern white or gray appearance	More utilitarian, industrial style
Long-Term Cost	Saves on cooling, fewer replacements	More affordable at installation
Upkeep & Maintenance	Minimal — easy to clean	Seams and adhesive joints need to be checked

Don't know whether to choose a TPO roof or an EPDM flat roof? We'll explain the pros and cons of each option.

TESTIMONIALS

Our Customer Reviews

Patrick L.

"Yuri fixed my flat roof and did a fantastic
job. Haven't had any issues since. My
neighbors roof/upper window was leaking
and he came and fixed that in a day. 100%
recommend this company to anyone with
any roofing needs. Quality work at a good
price"

Rajesh K.

"Skilled construction worker and team
manager. Talented roofer with wide
experience."

FAQ

How long does a flat roof last?

TPO — up to 25–30 years with proper maintenance.
EPDM — up to 30–35 years, especially with timely seam sealing.
Modified Bitumen — an average of 20–25 years.

Regular inspection extends the service life of any flat roofing system.

Is a flat roof actually flat?

No, the design includes a slight slope (1–3°) to direct water to the drains. This is a crucial part of the design handled by a flat roofing specialist — without it, water could pool and cause premature wear.

What are the advantages of TPO?

The white membrane reflects sunlight, lowering the temperature inside the building.
Excellent waterproofing — welded seams prevent leaks.
High resistance to chemicals, UV rays, and pollutants.
Ideal for commercial buildings with high-load requirements.

Can EPDM be installed on a residential home?

Yes. An EPDM flat roof is a versatile solution for residential flat roofing due to its flexibility, moisture resistance, and long service life. Many homeowners in Ewing choose a rubber roof to create a reliable, low-maintenance roof.

Still have questions? Contact us — we’ll provide a consultation, come for an inspection, and offer the best solution.

How Do You Decide Between Flat Roof Repair and Replacement?

We inspect the existing roof before recommending flat roof repair or replacement. Localized damage may be repairable when the surrounding membrane and underlying roof remain in suitable condition. More extensive deterioration may require a broader solution.

We explain the findings and proposed scope so you can understand why a repair, restoration, or replacement is recommended.

Still have questions?

CALL: (609) 516-6573